High-sensitivity optical to microwave comparison with dual-output Mach-Zehnder modulators Public Deposited

Downloadable Content

Download PDF
  • We demonstrate the use of two dual-output Mach-Zehnder modulators (DO-MZMs) in a direct comparison between a femtosecond (fs) pulse train and a microwave signal. Through balanced detection, the amplitude-to-phase modulation (AM-PM) conversion effect is suppressed by more than 40 dB. A cross-spectrum technique enables us to achieve a high-sensitivity phase noise measurement (−186 dBc/Hz above 10-kHz offset), which corresponds to the thermal noise of a +9 dBm carrier. This method is applied to compare a 1-GHz fs monolithic laser to a 1-GHz microwave signal generated from photodetection of a free-running 500 MHz mode-locked laser. The measured phase noise is −160 dBc/Hz at 4-kHz, −167 dBc/Hz at 10-kHz, and −180 dBc/Hz at offset frequencies above 100-kHz. The measurement is limited by the free-running 500-MHz laser’s noise, the flicker noise of the modified uni-traveling carrier photodiode and the thermal noise floor, not by the method itself. This method also has the potential to achieve a similar noise floor even at higher carrier frequencies.

Date Issued
  • 2018-03-12
Academic Affiliation
Journal Title
Journal Volume
  • 8
Last Modified
  • 2020-01-09
Resource Type
Rights Statement
  • 10.1038/s41598-018-22621-1
  • 2045-2322


In Collection: