-------------------
GENERAL INFORMATION
-------------------


1. Title of Dataset:  Dataset for "An Enhanced 'Flux-Corrected Transport'-Based Plasmasphere Refilling Model"


2. Authors: Jaden Fitzpatrick; Naomi Maruyama; Kausik Chatterjee 


--------------------------
SHARING/ACCESS INFORMATION
-------------------------- 


1. Licenses/restrictions placed on the data: CC BY 4.0


2. Links to publications that cite or use the data:  https://doi.org/10.25810/9vf2-1m93


4. Recommended citation for the data: Fitzpatrick, J., Maruyama, N., & Chatterjee, K. (2026). Dataset for "An Enhanced 'Flux-Corrected Transport'-Based Plasmasphere Refilling Model" [Data set]. University of Colorado Boulder. https://doi.org/10.25810/9VF2-1M93



---------------------
DATA & FILE OVERVIEW
---------------------

The model data used for, “An Enhanced ‘Flux-Corrected Transport’-Based Plasmasphere Refilling Model” will be made available once accepted for publication. Below is a description of how the data will be formatted.

The data is organized by figure, with some figures having multiple associated data files. All files will be in .txt format.

~ Figure 1 ~
File name: ‘fig1.txt’
Purpose: data for fig. 1
Col 1: latitude (deg)
Col 2: H+ northern hemisphere stream conc (cm-3)
Col 3: H+ southern hemisphere stream conc (cm-3)
Col 4: He+ northern hemisphere stream conc (cm-3)
Col 5: He+ southern hemisphere stream conc (cm-3)
Col 6: O+ northern hemisphere stream conc (cm-3)
Col 7: O+ southern hemisphere stream conc (cm-3)

~ Figure 2 ~
File name: ‘fig2.txt’
Purpose: data for fig. 2
Col 1: latitude (deg)
Col 2: temp at 10 min (K)
Col 3: temp at 20 min (K)
Col 4: temp at 30 min (K)
Col 5: temp at 40 min (K)
Col 6: temp at 50 min (K)
Col 7: temp at 60 min (K)

~ Figure 3 ~
File name: ‘fig3_cont.txt’
Purpose: data for contour plot in top panel of fig. 3
Col 1: latitude (deg) (repeats after every time step)
Col 2: H+ total conc (cm-3)

File name: ‘fig3_constT.txt’
Purpose: data for T=c lines in middle and bottom panels of fig. 3
Col 1: time (hr)
Col 2: total equatorial conc (cm-3)
Col 3: H+ fraction of total conc
Col 4: He+ fraction of total conc
Col 5: O+ fraction of total conc

File name: ‘fig3_varT.txt’
Purpose: data for T=T(s,t) lines in middle and bottom panels of fig. 3
Col 1: time (hr)
Col 2: total equatorial conc (cm-3)
Col 3: H+ fraction of total conc
Col 4: He+ fraction of total conc
Col 5: O+ fraction of total conc

~ Figure 4 ~
File name: ‘fig4_eqconc.txt’
Purpose: data for concentrations in top panels of fig. 4
Col 1: time (hr)
Col 2: standard equatorial conc (cm-3)
Col 3: symm. 0.5*H+ equatorial conc (cm-3)
Col 4: asymm. 0.5*H+ equatorial conc (cm-3)
Col 5: symm. 0.5*He+ equatorial conc (cm-3)
Col 6: asymm. 0.5*He+ equatorial conc (cm-3)
Col 7: symm. 0.5*O+ equatorial conc (cm-3)
Col 8: asymm. 0.5*O+ equatorial conc (cm-3)

File name: ‘fig4_finconc.txt’
Purpose: data for bottom panels of fig. 4
Col 1: latitude (deg)
Col 2: standard final conc (cm-3)
Col 3: symm. 0.5*H+ final conc (cm-3)
Col 4: asymm. 0.5*H+ final conc (cm-3)
Col 5: symm. 0.5*He+ final conc (cm-3)
Col 6: asymm. 0.5*He+ final conc (cm-3)
Col 7: symm. 0.5*O+ final conc (cm-3)
Col 8: asymm. 0.5*O+ final conc (cm-3)

~ Figure 5 ~
File name: ‘fig5.txt’
Purpose: data for fig. 5 (same as temps in fig 4)
Col 1: time (hr)
Col 2: standard equatorial temp (K)
Col 3: symm. 0.5*H+ equatorial temp (K)
Col 4: asymm. 0.5*H+ equatorial temp (K)
Col 5: symm. 0.5*He+ equatorial temp (K)
Col 6: asymm. 0.5*He+ equatorial temp (K)
Col 7: symm. 0.5*O+ equatorial temp (K)
Col 8: asymm. 0.5*O+ equatorial temp (K)

~ Figure 6 ~
File name: ‘fig6.txt’
Purpose: data for fig. 6
Col 1: time (hr)
Col 2: L=3 equatorial temp (K)
Col 3: L=4 equatorial temp (K)
Col 4: L=3 equatorial conc (cm-3)
Col 5: L=4 equatorial conc (cm-3)